Lencore Spectra i.Net: Installation and Operations Manual Bedienungsanleitung PDF herunterladen (Seite 28)

section 5

5.9 | schematics

Connect each power supply and i.Lon Central Control Server and MPI to a dedicated 20

amp receptacle. Each dedicated circuit must be a 120V/20 amp.

Once each item is connected, you may visually observe in the power supply a lit green

LED, and sequencing of lights on the i.Lon® server and MPI.

The i.Lon® needs approximately two minutes to completely boot up.

You will not hear any sound for approximately 30 seconds. The OPs count down from 20

to 0 before booting up. (This permits new software/firmware uploads and tracking of

any corrupt data.)

TO POWER THE SYSTEM:

ONCE THE SYSTEM IS PLUGGED IN:

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 57 58

Keine Kommentare

Lencore Spectra i.Net: Installation and Operations Manual Bedienungsanleitung Seite 28